Do you really know the products of UL electronic wire manufacturers?

1. Scope of application: UL 1015 electronic wire is the internal connecting wire of electrical equipment.

2. Rated temperature and voltage: The temperature resistance level is 80 ℃, 90 ℃, 105 ℃, the voltage is 600Vac, 750Vdc.

3. Flame retardant requirements: Pass UL VW-1 and CSA Ft1 vertical flame resistance test.

4. Product requirements: Must pass UL VW-1 and CSA Ft1 vertical flame resistance tests with uniform insulation thickness.

5. UL 1015 electronic wire components: Insulation layer and conductor are included. The outer layer is PVC insulation layer. The Chinese name for PVC is polyvinyl chloride. The inner conductor should be divided into bare copper and tinned copper according to the standard.

6. Product application of ul electronic wire manufacturers:

a. Single bare copper: It is generally used for fixed laying (such as pipe line, T-type fluorescent lamp holder), and it is more convenient to connect with line connectors and equipment. Multi-strand copper wires usually need to be pressed or welded.

b. Multi-stranded conductors: Copper wires are relatively soft, and it is suitable for situations where the conductors are required to follow the movement (such as motors, electrical cabinets, power distribution boxes, instruments, chargers, audio, medical equipment, toys, household appliances) Where multiple wires are laid together (easy for wiring and wire harness formation), compared to single-stranded wires, multi-stranded wires are mostly used for control lines.

What should be paid attention to during the transportation and storage of ul electronic wires produced by ul electronic wire manufacturers?

1. It is strictly forbidden to drop the electric wire manufacturer's products and wires from high places or wire reels equipped with wires during transportation, especially at lower temperatures (generally around 5 ° C and below). Dropping the wire may cause the insulation and sheath to crack.

2. As far as possible, avoid storing electronic wires in the open in an open way. The wire reels are not allowed to lay flat.

3. When lifting packages, it is strictly forbidden to lift several trays at the same time. A roll of UL10071 electronic wire is light in weight and should be packed in a cardboard box for reinforcement. The terminal connecting wire is a plastic part, so it should be sealed in a packaging bag and handled gently. On vehicles, ships, and other means of transportation, the wire reels must be fixed with a suitable method to prevent collision or overturning to prevent mechanical damage to the wires.

4. UL electronic wire manufacturers remind you that electronic wires are strictly forbidden from contact with acids, alkalis and mineral oils. They must be stored separately from these corrosive substances. There must be no harmful damage to the insulation and corroded metals in the warehouse where the wires are stored. Gas is present.

5. During the storage period of the wire, it should be moved as scheduled (once every 3 months in summer, other seasons can be extended as appropriate). When moving, turn the side of the storage tray downwards and upwards to prevent the bottom from rotting. When storing, pay attention to whether the wire head is intact.

6. The storage period of the wire is limited to the product ex-factory period. Generally, it should not exceed one and a half years, and the longest should not exceed two years.